Commax Dp-ra01 Installation Manual //top\\ -

Commax DP-RA01 is a room station handset used in audio doorphone systems, typically paired with a door station (like the DR-2K) to provide two-way communication and remote door release. 華輝電子(集團) 有限公司 Installation & Wiring Guide

Installation involves connecting the room station to the door unit and an optional electric door strike. כומפניקס Mounting the Station Separate the mounting bracket from the handset.

Secure the bracket to the wall at a comfortable height (typically about 1.45m from the floor) using the provided screws. Ensure the product is at least 10cm away from the wall if it generates heat to allow for proper ventilation. Wiring Connections Door Station to Room Station

to connect the door station (DR-2K or similar) to the room station. These are typically non-polar, but check your specific unit's diagram to be sure. Power Source : Connect the AC power cord (available for models like ) to a standard outlet. Door Release (Optional)

: Connect the electric door strike to the dedicated terminals on the room station using 2 wires. Final Assembly Attach the handset to the mounting bracket.

Plug in the power and test the call and door release buttons to ensure the system functions correctly. Technical Specifications Power Source : AC 110V/220V (50/60Hz). Wiring Distance : Effective up to using 0.65Ø copper wire. Dimensions : Approximately 108(W) x 210(H) x 33(D) mm. Magnet Security & Automation Safety Precautions Avoid Wet Hands

: Do not handle the power cable with wet hands to prevent electric shock. Weather Hazards : Do not install the product during lightning or thunder.

: Do not attempt to remove the cover; refer servicing to qualified personnel. For detailed diagrams, you can refer to resources like the Commax Wiring Guide User Manuals from authorized distributors. 華輝電子(集團) 有限公司 wiring diagram

specifically for a master/slave setup with multiple handsets? User Manual

The Commax DP-RA01 is a surface-mounted audio door phone room unit designed for single-house communication. It provides two-way audio communication with a door station and includes a dedicated button for remote door release. 1. Key Specifications Power Source: AC 100V–240V (50/60Hz). Wiring Type: Door Station to Handset: 2-wire connection.

Door Release: 2-wire connection (typically requires a separate power source depending on the lock model).

Mounting Type: Surface-mounted using a wall-mounting bracket.

Connectable Products: Compatible with door stations such as the DR-2G, DR-2K, DR-201D, and DR-2AN. 2. Installation Steps

The installation requires mounting the bracket and completing the non-polarity wiring between units.

Prepare the Mounting Site: Choose a location away from excessive humidity, direct sunlight, or heat sources. Attach the Bracket:

Secure the provided wall-mounting bracket to the wall using the included screws.

Wire the Door Station: Connect the two wires from the door station to the terminal ports on the back of the . These are generally non-polarity connections. commax dp-ra01 installation manual

Wire the Door Release (Optional): Connect the electrical door lock to the designated door release terminals (often terminals 5 and 6) on the room unit.

Mount the Unit: Align the slots on the base of the handset with the hooks on the wall bracket and pull the unit down slightly to secure it.

Power Connection: Once all wiring is complete, plug the power cord into a standard AC outlet. COMMAX DP-2S User Manual | PDF | Electrical Wiring - Scribd

Title: Installation Guide and Technical Reference: Commax DP-RA01 Rainproof Outdoor Station

Document Type: Informative Technical Paper Subject: Installation, Wiring, and Configuration of the Commax DP-RA01

Standard Terminal Assignment:

Note: Wire colors may vary based on the specific cable manufacturer. Always trace wires using a multimeter if colors do not match the standard.

Conclusion

The Commax DP-RA01 installation manual is not just a piece of paper—it’s the roadmap to a reliable video intercom system. By understanding the 4-wire color codes, mastering the DIP switch logic, and knowing where to find the VR adjustment dials, you can complete the installation in under 30 minutes.

Whether you are an AV technician wiring a new apartment block or a DIY homeowner replacing an old unit, this guide gives you the technical clarity missing from the original manufacturer’s leaflet. Always respect electrical safety, test all functions before final mounting, and keep the official PDF saved on your phone for future reference.

Need more help? Leave a comment with your specific wiring issue (include wire colors and camera model), and we’ll help you decode the solution.

Setting Up Your Commax DP-RA01: A Simplified Installation Guide

Adding a reliable intercom like the Commax DP-RA01 is a smart move for home security and convenience. This handset-type audio door phone is known for its straightforward 2-wire setup and sturdy design.

If you’ve recently picked one up or found an old unit without the manual, this guide breaks down the essential installation steps to get your system up and running. 1. What’s in the Box? Before starting, ensure you have the primary components:

DP-RA01 Master Handset: The indoor unit with the receiver and door release button.

Wall Mounting Bracket: The metal or plastic plate that secures the handset to your wall.

Mounting Screws: Specifically designed for the bracket and handset. 2. Pre-Installation Safety Commax DP-RA01 is a room station handset used

Intercom installation involves electrical components. Always follow these safety basics:

Power Down: Ensure the power source (AC 100-240V) is turned off at the breaker before touching any wires.

Avoid Moisture: Do not install the unit in areas exposed to direct rain or high humidity to prevent short circuits.

Check Distance: Ensure your wiring doesn't exceed 100m for 0.65Ø wire or 150m for 0.8Ø wire to maintain clear audio quality. 3. Wiring and Connections

The DP-RA01 is prized for its non-polarity 2-wire system, meaning you don't have to worry about "positive" or "negative" when connecting the door station.

Door Station to Handset: Connect two wires from the outdoor door station (such as the DR-201D) to the corresponding terminals on the back of the DP-RA01.

Door Release (Electric Lock): If you are using an electric door strike, connect it using an additional 2-wire path. Note that the power for the lock often requires its own dedicated 12V DC power source depending on your specific lock model.

Power Supply: Plug the DP-RA01 into a standard AC outlet (100-240V). 4. Mounting the Unit

Fix the Bracket: Screw the mounting bracket firmly to the wall at a comfortable height (usually around 145cm from the floor).

Attach the Handset: Align the grooves on the back of the DP-RA01 with the hooks on the bracket. Slide the unit down until it clicks securely into place. 5. Testing Your System Once everything is connected and powered on:

Test the Call: Have someone press the button on the outdoor station. You should hear a clear chime from the handset.

Check the Audio: Lift the handset and verify you can hear the visitor clearly and they can hear you.

Test Door Release: Press the key-shaped button on the handset to ensure the electric lock triggers correctly. Troubleshooting Tips COMMAX DP-SS Intercom Audio Phone User Manual

The Commax DP-RA01 is an audio doorphone room station typically installed as part of a single-house intercom system. It is designed for surface mounting and operates on a universal power source of AC 100-240V. Installation Steps

Mount the Bracket: Secure the included wall-mounting bracket to a flat surface using the provided screws. Wiring Connections:

Door Station: Connect 2 wires from the door station to the designated terminals on the DP-RA01. This connection is typically non-polarity, meaning the order of the two wires does not matter. Standard Terminal Assignment: | Terminal Label | Function

Door Release: If installing an electric door strike, connect 2 additional wires from the DP-RA01 to the door lock. Note that the door release may require its own separate power source depending on the lock type.

Attach the Handset: Align the grooves on the back of the DP-RA01 unit with the hooks on the wall bracket. Slide the unit down firmly until it locks into place.

Power Up: Plug the unit into a standard AC outlet. Avoid handling the power cable with wet hands to prevent electric shock. Compatible Equipment

The DP-RA01 is designed to work with various Commax outdoor door stations, including: Door Stations: DR-2G, DR-2K, DR-201D, and DR-2A2N. Key Specifications Feature Power Source AC 100-240V, 50/60Hz Wiring 2-wire (Door Station), 2-wire (Door Release) Mount Type Surface mount Functions Audio talk with visitor, door release button User Manual

The COMMAX DP-RA01 is a surface-mount room station designed for simple two-wire audio communication with a door station. Key Specifications Power Source: AC 100–240V, 50/60Hz. Wiring: Door Station: 2 wires (non-polar).

Door Release: 2 wires (requires an additional power source for the electric lock).

Distance: Effective up to 100m (using 0.65mm wire) or 150m (using 0.8mm wire).

Compatible Door Stations: DR-2G, DR-2A2N, DR-2A3N, DR-2AN, DR-201D, DR-2K, DR-206, and DR-201A. Installation Steps

Mounting the Bracket: Secure the wall-mount bracket to your desired location using the provided screws. Wiring Connections:

Connect the two wires from the door station to the designated terminals on the back of the DP-RA01.

If installing an electric door lock, connect the two lock wires to the "Door Release" terminals. Note: The lock typically requires its own power supply.

Attaching the Unit: Align the grooves on the back of the handset with the hooks on the bracket. Slide the unit down firmly to lock it into place.

Powering Up: Plug the AC power cord into a standard outlet. Avoid handling the plug with wet hands to prevent electric shock. Operation Guide

6. Technical Specifications

Model: DP-RA01
Camera Sensor: 1/3" CMOS
Resolution: Approx. 300k – 600k Pixels (varies by revision)
Lens Angle: Approx. 92° diagonal
Min. Illumination: 0.1 Lux (IR LED ON)
Operating Temperature: -20°C ~ +50°C
Humidity: 0% ~ 85% RH
Power Source: Powered by the indoor monitor via the 4-wire connection (Voltage approx. 12V DC – 15V DC depending on monitor model).
Dimensions: Approx. 110(W) x 155(H) x 50(D) mm

Step 5: System Testing

Apply power to the indoor monitor unit.
Press the call button on the DP-RA01. The indoor monitor should ring and display video.
Check the "Night Vision" by covering the light sensor on the front panel; the IR LEDs should emit a faint red glow.
Test the audio quality by speaking into the microphone.

5. Attach Unit to Bracket

Align the DP-RA01 with the mounted bracket.
Slide down slightly until it clicks.
Tighten the security screw (small hex or Phillips) at the bottom edge.

8. Where to Download the Official PDF Manual

While this guide covers 90% of the commax dp-ra01 installation manual, you should keep the official PDF for warranty and detailed schematics.

Official sources:

Commax USA / Commax Global website → Support → Downloads → Search “DP-RA01”.
Manualslib.com or Manuals.plus (search for “Commax DP-RA01 installation manual”).
Scan the QR code on the side of your original box.

Pro Tip: The file name is typically DP-RA01_ENG_MNL_REV1.0.pdf. Look for this exact name.

12. Where to Find the Official PDF Manual

While this guide covers 95% of installation scenarios, Commax occasionally revised PCB layouts. For the exact Commax DP-RA01 installation manual:

Visit the official Commax website (commax.com) > Support > Download Center.
Search “DP-RA01.”
If unavailable, email Commax technical support with the serial number from the back of your unit.

Alternatively, many third-party intercom suppliers host archived PDFs. Search for DP-RA01_manual_rev2.1.pdf.