Canon Imageclass D520 Printer Driver For Windows 10 64-bit -
The Canon imageCLASS D520 is a compact, monochrome laser multifunction printer that supports printing, copying, and scanning. For Windows 10 64-bit users, the necessary driver package is the imageCLASS D520 MFDrivers (UFR II / ScanGear), which includes both the printer and scanner drivers. Driver Details for Windows 10 (64-bit)
Driver Version: UFR II Printer Driver V20.31 / ScanGear V11.3 File Name: D520MFDriversV2031W64ukEN.exe File Size: Approx. 16.14 MB Last Updated: December 07, 2021 Official Download: Available on the Canon Support Page. Installation Steps
Preparation: Ensure your printer is not connected to your computer via USB before starting the installation.
Download: Visit the official Canon India or Canon Singapore support sites and download the 64-bit MFDrivers.
Run Installer: Double-click the downloaded .exe file to extract the contents and launch the Setup Wizard.
Follow Prompts: Proceed through the on-screen instructions. Connect the USB cable only when prompted by the installer.
Finalize: Complete the wizard and restart your computer if requested to ensure all components are properly initialized. Key Printer Specifications
Complete Guide: Installing Canon imageCLASS D520 Drivers on Windows 10 (64-bit)
The Canon imageCLASS D520 is a compact, monochrome laser 3-in-1 device designed for small offices, offering efficient printing, copying, and scanning. To maintain peak performance on modern systems like Windows 10 64-bit, using the official manufacturer drivers is essential for full functionality, including duplex printing and color scanning. Essential Driver Information
The primary driver for this model is the UFR II Printer Driver combined with ScanGear for scanning capabilities. File Name: D520MFDriversV2031W64ukEN.exe Version: V20.31 (Printer) / V11.3 (ScanGear) File Size: Approximately 16.14 MB
Compatibility: Fully supports Windows 10 (x64) and Windows 11. Step-by-Step Installation Guide
Follow these steps to ensure a clean installation and avoid common connectivity issues:
[Windows 64bit] imageCLASS D520 MFDrivers (UFR II / ScanGear)
To install the Canon imageCLASS D520 on a Windows 10 64-bit system, you need the MFDrivers (UFR II / ScanGear) canon imageclass d520 printer driver for windows 10 64-bit
package, which bundles both the printer and scanner drivers. Download and Driver Specifications
The latest official driver version for the 64-bit environment is , which was last updated in December 2021. File Name: D520MFDriversV2031W64ukEN.exe UFR II Printer Driver V20.31 / ScanGear V11.3 Official Support Pages: Available via Canon Asia Canon India Canon Thailand Step-by-Step Installation Guide
For a successful installation, it is critical to follow the correct hardware connection sequence to avoid "device not recognized" errors. Prepare the Connection: Disconnect the USB cable
between your printer and computer before running the installer. Run the Installer: Double-click the downloaded file. If prompted by User Account Control (UAC), click Follow the Wizard:
The Setup Wizard will extract the drivers and guide you through the process. Connect the Hardware:
Only connect the USB cable when the installer explicitly prompts you to do so or after the software setup is complete.
Once finished, restart your computer to ensure all services (especially for scanning) are correctly initialized. Troubleshooting Common Issues
If you encounter problems after updating Windows or during the initial setup: Scanner Not Responding:
This is a common issue on Windows 10. If scanning fails, you may need to download a specific USB Scan Patch Canon Support site or completely uninstall and reinstall the MF drivers. Driver Unavailable:
If Windows shows the driver as "unavailable," remove the device from Settings > Devices > Printers & Scanners
, restart, and perform a clean installation with the USB cable disconnected initially. Manual Update:
If the automatic installer fails, you can manually update the driver through the Device Manager
by pointing it to the folder where the driver files were extracted. Printer Features & Highlights The Canon imageCLASS D520 is a compact, monochrome
The imageCLASS D520 is a monochrome laser multi-function printer designed for efficiency.
The Frustrating Print Job
It was a typical Monday morning for John, a small business owner who relied heavily on his Canon ImageCLASS D520 printer to print important documents for his clients. He had purchased the printer a few years ago, and it had been a reliable workhorse ever since. However, after upgrading his computer to a new Windows 10 64-bit machine, he encountered a frustrating problem.
As he tried to print a crucial report, his computer displayed an error message indicating that the printer driver was not compatible with the new operating system. John tried to search for a solution online, but to no avail. He visited the Canon website, but the driver download page seemed to be outdated, and the links to download the driver were not working.
With a looming deadline to submit the report to his client, John became increasingly anxious. He called Canon's customer support, but the representative told him that the ImageCLASS D520 printer was an older model, and they might not have a compatible driver for Windows 10 64-bit.
Determined to find a solution, John decided to try a different approach. He searched for alternative driver download sites, but he was wary of downloading drivers from untrusted sources, fearing that they might contain malware.
Just when he was about to give up, John stumbled upon a forum post from another user who had encountered a similar issue. The user had shared a link to a trusted driver download site, which offered a compatible driver for the Canon ImageCLASS D520 printer.
With newfound hope, John downloaded and installed the driver. He restarted his computer and printer, and to his relief, the printer began to work seamlessly with his Windows 10 64-bit machine.
The Solution
The driver that John downloaded was a 64-bit version of the Canon ImageCLASS D520 printer driver, specifically designed for Windows 10. The driver enabled his computer to communicate with the printer, allowing him to print high-quality documents once again.
From that day on, John made sure to bookmark the trusted driver download site and keep his printer drivers up to date, ensuring that he could always rely on his Canon ImageCLASS D520 printer to get the job done.
The Canon ImageCLASS D520 Printer Driver
For those who may encounter a similar issue, here are the details of the Canon ImageCLASS D520 printer driver: Printer Model: Canon ImageCLASS D520 Driver Version: 4
- Printer Model: Canon ImageCLASS D520
- Driver Version: 4.20 (or later)
- Operating System: Windows 10 64-bit
- Driver Type: Printer driver (64-bit)
Downloading and Installing the Driver
To download and install the Canon ImageCLASS D520 printer driver for Windows 10 64-bit, follow these steps:
- Visit the trusted driver download site (e.g., Canon's official website or a reputable driver download site).
- Search for the Canon ImageCLASS D520 printer driver.
- Select the 64-bit version of the driver for Windows 10.
- Download and save the driver file to your computer.
- Run the driver installation file and follow the on-screen instructions to install the driver.
- Restart your computer and printer.
By following these steps, you should be able to install the compatible driver and get your Canon ImageCLASS D520 printer working with Windows 10 64-bit.
Part 6: Optimizing the Canon D520 on Windows 10 (64-bit)
Once installed, you can tweak settings to maximize performance.
5. Troubleshooting Deep Guide
| Problem | Solution |
|---------|----------|
| "Driver is not intended for this platform" | You downloaded 32-bit driver. Download the 64-bit version from Windows 8.1 section. |
| USB not detected after install | Use a different USB port (avoid USB 3.0 hubs – use USB 2.0 directly on motherboard back panel). |
| Printer shows offline | Open Services.msc → Restart Print Spooler. Then remove and re-add printer via Method A. |
| Scanning doesn’t work | The D520 requires Canon MF Toolbox (Win 8.1 version). Download from same Canon page. After install, run in Win 8.1 compat mode. Or use Windows Fax and Scan (basic). |
| Driver signature error | During boot, press F8 → Disable Driver Signature Enforcement → install again. |
| Print jobs stuck in queue | Stop Print Spooler service → delete files in C:\Windows\System32\spool\PRINTERS\ → restart spooler. |
4. Post-Install Validation
- Check Driver File: In Devices and Printers → right-click D520 → Printer properties → Advanced tab → verify Driver shows "Canon imageCLASS D520 UFR II".
- Test Page: Print a test page from the same tab.
- Port Check: Ensure port is
USB001(notWSDorNetwork).
Source 1: Canon USA / Canon Global Support Site
This is the gold standard. Canon maintains a comprehensive archive for legacy devices like the imageCLASS D520.
- Navigate to usa.canon.com/support (or your regional Canon site).
- In the search bar, type "imageCLASS D520" .
- Select "Drivers & Downloads."
- Under "Operating System," select Windows 10 (64-bit) .
- You will typically see two files:
- Printer Driver (UFR II / PCL5e / PCL6) – This is the primary driver.
- Scanner Driver – Required if you use the D520’s scan-to-PC function.
Current Filename Example: D520_W64_230_00.exe (Version numbers may vary).
Option 2: Social Media Style (Best for Facebook, Twitter/X, or LinkedIn)
Headline: 🖨️ Got an old Canon D520? Here’s how to keep it running on Windows 10!
Body: Don't throw out your Canon imageCLASS D520 just because you upgraded your computer! Even though this is a legacy model, you can still get it working perfectly on Windows 10 64-bit.
👇 Quick Fix Steps: 1️⃣ Navigate to the Canon Support website. 2️⃣ Search "imageCLASS D520." 3️⃣ Filter by OS: Windows 10 64-bit. (Pro Tip: If the Win10 driver isn't visible, the Windows 8.1 driver works perfectly!) 4️⃣ Download, install, and plug in your USB.
Save money on new hardware and keep printing! 🖨️💻
#Canon #PrinterDriver #Windows10 #TechSupport #SmallBiz #OfficeTips
7. Permanent Driver Management Tips
- Prevent Windows from "updating" the driver:
Go to Settings → System → About → Advanced system settings → Hardware → Device Installation Settings → Choose No. - Backup working driver: Use
pnputil /export-driver *to save the INF and files. - After Windows feature update: Re-run the manual "Have Disk" install – major updates often reset to Microsoft class driver.