Autodata 345 The Hardware Information Does Not Match With Your Dongle Best [best] -

"the hardware information does not match with your dongle" Autodata 3.45

occurs when the software detects a mismatch between your computer's hardware configuration and the license or dongle emulator being used

. This is common if hardware has changed since installation or if the virtual device drivers are not correctly configured. Common Solutions Update Sentinel Drivers : Ensure the Sentinel Protection Installer is correctly installed. Check the Device Manager

; you should see "SafeNet Sentinel Hardware Key" under "Universal Serial Bus controllers" or "AuDaS0 Virtual Device" under "System Devices". Re-generate License File

: If your hardware has changed (e.g., a new motherboard or CPU), your Unique ID (UID) will change. You must generate a new UID and use it to create a fresh license file for your specific machine. Run as Administrator

: Ensure you are running both the emulator and the Autodata application as an Administrator to give the software proper access to hardware identifiers. Check Regional Settings : Some versions of Autodata 3.45 require the system's Regional Settings to be set to English (United States) to function without errors. Re-enable Emulator

: If the virtual device shows an exclamation mark in Device Manager, manually reinstall the Emulator_x64 Emulator_x86 files provided with your installation package.

For detailed step-by-step guides, refer to documentation like the Autodata 3.45 Installation Guide on Scribd or video tutorials on for resolving Sentinel Key errors. Did you recently change any hardware on your computer, or did this error start appearing after an update

The error "The hardware information does not match with your dongle" in Autodata 3.45 typically occurs when the hardware ID (UID) of your current computer does not align with the license file or the emulator settings. This usually happens after a hardware change, an OS update, or an incorrect installation of the sentinel emulator. Solution 1: Re-register the Emulator and License

Most users resolve this by regenerating the license file specifically for their current hardware ID.

Disable Antivirus & UAC: Turn off your antivirus and User Account Control (UAC) for at least 10 minutes to prevent the emulator files from being blocked.

Generate a New UID: Run the hardware ID generator tool (often named GetUID.exe or similar) as an Administrator to retrieve your current PC's 8-digit (32-bit) or 10-digit (64-bit) code. "the hardware information does not match with your

Import the License: Use that UID to generate a new license registry file (.reg). Double-click this file to import the new hardware information into your Windows registry.

Restart the Emulator: Open the emulator folder (usually named AuDaS0) and click the "green traffic light" icon to restart the service with the updated hardware info. Solution 2: Sign the Emulator Drivers (Windows 7/8/10)

Windows often blocks the sentinel emulator because its drivers are unsigned.

Enable Test Mode: Run a tool like Driver Signature Enforcement Overrider (DSEO) as Administrator and select Enable Test Mode.

Sign the File: In DSEO, select Sign a System File and provide the path to your emulator file (e.g., C:\Program Files (x86)\Autodata 3.45\AuDaS0.sys).

Reboot: Restart your computer. You should see "Test Mode" in the bottom corner of your desktop, which allows the emulator to run. Quick Troubleshooting Checklist

Administrator Rights: Always run the installation commands and the final program as an Administrator.

Sentinel Drivers: Ensure the Sentinel Protection Installer is correctly installed before running the emulator.

Regional Settings: Some versions of Autodata 3.45 require your PC's regional settings to be set to "English (United States)" to function properly.

Installing Autodata 3.45 Guide | PDF | X86 Architecture - Scribd

The error "Hardware information does not match with your dongle" in Autodata 3.45 typically occurs because the software's license is tied to a specific hardware UID (Unique ID) that no longer matches your current system configuration or emulator settings. Core Reasons for the Mismatch Step 6: Last Resort – Reinstall Autodata with

UID Changes: A new hardware ID was generated (common after Windows updates or hardware changes), making the old license file invalid.

Emulator Failure: The Sentinel Dongle Emulator is not running or was not installed with administrative privileges.

Incorrect Regional Settings: The software often requires the system locale to be set to English (United States) to validate the license properly. Resolution Steps

To fix this mismatch, you generally need to re-generate the license for your specific hardware: Enable Test Mode:

On Windows 7/8/10, you must enable Test Mode for the emulator to function.

Run the "Enable Test Mode" utility as Administrator and reboot your PC. You should see "Test Mode" in the bottom right corner of your desktop. Generate a New License:

Run the UID generator (often named GetUID.exe or similar) as Administrator.

Copy the resulting code and use your specific keygen/license generator to create a new .reg or .lic file.

Double-click the new registry file to add it to your system. Start the Emulator:

Navigate to the installation folder and run Start.exe or the emulator installer as Administrator.

Ensure the Sentinel driver is active in your Device Manager. Adjust Regional Settings: Why Does "The Hardware Information Does Not Match

Open Control Panel > Region and set the format to English (United States) if you still encounter errors.

For detailed visual steps, you can refer to community guides like the Autodata 3.45 Installation Guide on Scribd or troubleshooting videos on YouTube.

Did you recently update Windows or change hardware components before this error appeared? Autodata 3.45 Installation Guide | PDF - Scribd

Step 6: Last Resort – Reinstall Autodata with Dongle Present

Uninstall Autodata completely, restart, then reinstall while the dongle is plugged in. Some installations detect the dongle during setup and configure the license correctly.

Why Does "The Hardware Information Does Not Match with Your Dongle" Appear?

Here are the most common real-world scenarios that trigger this error:

🥇 Best Solution #1: Regenerate the License File (Re-Pair Dongle to PC)

If you have the original installation files and a genuine license.

This is the official method. Autodata includes a license management tool (hidden in the installation folder).

Steps:

1. Unplug the dongle.
2. Navigate to C:\Program Files (x86)\Autodata Limited\Autodata\ (or C:\AutoData\).
3. Find and delete (or rename) these files:
   • license.lic
   • hardware.id
   • .dat license cache files.
4. Reinstall the Sentinel HASP drivers (download the latest HASPUserSetup.exe from SafeNet/Thales).
5. Reboot your PC.
6. Plug in the dongle. Wait for “Driver installing” notification.
7. Re-open Autodata 345. It will detect “New hardware configuration” and ask for your dongle serial number (printed on the dongle sticker) or a license key file provided by Autodata at purchase.
8. If prompted, re-enter the installation key. The software will now re-pair the dongle to the new hardware info.

✅ This works 95% of the time for genuine single-PC licenses.

7. Test on another machine

Plug the dongle into another PC with Autodata installed to see if the error follows the dongle (indicates dongle issue) or stays on the original PC (indicates PC/config issue).