Autocraft Battery — Charger Ac-60cr Manual ((full))

Feature: Intelligent 6-Volt/12-Volt Dual-Voltage Compatibility

The Autocraft AC-60CR is designed with a versatile dual-voltage system, allowing users to safely charge and maintain both standard 12-volt automotive batteries and legacy 6-volt systems found in classic cars, motorcycles, and lawn equipment. This feature is managed by a manual voltage selection switch, ensuring the correct amperage and charging curve are applied to the specific battery type, preventing overcharging and optimizing battery longevity. autocraft battery charger ac-60cr manual

Basic Charging Procedure

  1. With charger plugged in, select mode if applicable (e.g., Normal / Fast / Maintain). If the unit is automatic, it will sense battery state and select current.
  2. Charger will indicate charging (LED or meter).
  3. Allow charging until the charger indicates full/float state. For automatic chargers this may switch to a lower maintenance current.
  4. Once fully charged and in float/maintenance, unplug charger from mains.
  5. Remove clamps: black (−) first, then red (+).

The Complete Guide to the Autocraft Battery Charger AC-60CR: Manual, Operation, and Troubleshooting

If you own an Autocraft battery charger, particularly the AC-60CR model, you know it is a robust piece of equipment designed to keep your vehicle’s battery alive and kicking. However, like any sophisticated piece of technology, understanding its full potential requires one critical document: the Autocraft Battery Charger AC-60CR Manual. Basic Charging Procedure

This article serves as a comprehensive substitute and companion to the original manual. Whether you have lost your physical copy, are dealing with a blinking error light, or simply want to ensure you are using the charger correctly, you have come to the right place. With charger plugged in, select mode if applicable (e

4.4 Selecting mode

  • Press MODE until the correct battery type/voltage is displayed.
  • Example: 12V STD for a regular car battery.

Step 1: Preparation

Ensure the battery terminals are clean. Use a wire brush to remove corrosion (white/green powder) to ensure a solid connection.