Installing Autocom 2020.23 typically involves a specific activation process rather than a single static password. Because this software is often distributed as a modified or "unlocked" version of the original diagnostic suite, the "password" or activation usually refers to the FileActivation.xml process. Installation & Activation Guide
To successfully install and activate Autocom 2020.23, follow these standard procedural steps: 1. System Preparation
Disable Antivirus: Most "keygens" or activation patches are flagged as false positives. Disable Windows Defender and any third-party antivirus before extracting files.
System Requirements: Ensure you have .NET Framework 4.5.1 (or higher) installed on Windows 7, 10, or 11. 2. Software Installation
Run the Main.exe or Setup.exe file found in the installation folder.
Follow the prompts to install the software to your local drive (usually C:\Autocom 2020.23). 3. Generating the Activation File
When you launch the program for the first time, it will ask for a Serial Number and Hardware Key. Common Generic Serial: 100251
Click "Next" and the software will prompt you to save a file named FileActivation.xml. Save this to your desktop. 4. The "Password" (Activation Step)
The "password" in this context is the activated version of that XML file. You generally have two options:
Self-Activation: If your download included a Keygen.exe, open it, load your FileActivation.xml, click Activate/Patch, and save the new version.
Manual Activation: Some distributors require you to send this XML file to them via email or a forum thread to receive the "unlocked" version back. 5. Finalizing Installation
In the Autocom startup window, click Open (or "Load") and select the newly patched FileActivation.xml.
The software will process the file and launch the full diagnostic interface. Common Troubleshooting
"Wrong Password" on Archive: If the .zip or .rar file itself requires a password to extract, check the source website. Common default passwords are often 1234, auto, or the URL of the site you downloaded it from.
VCI Update: Once installed, connect your hardware (VCI) via USB and run the Firmware Update within the software settings to ensure the hardware is compatible with the 2020.23 version.
Installing Autocom 2020.23 typically involves a two-step "password" process: a literal installer password and a software activation file. 1. Installer Password
During the initial setup of many 2020.23 distributions, the installer will prompt for a password to proceed. The most common default password used by various software providers for this version is: 2. Software Activation
The "main" barrier to installation is the software activation, which replaces a traditional product key. System Date:
Before beginning activation, some versions require you to set your PC system date to 15.12.2021 to bypass certificate errors. FileActivation.xml: After installing the software, you must run it and select to save a file named FileActivation.xml Activation:
This file is typically sent to the software seller or processed through a "Keygen" or "Activator" tool to generate a working license. 3. Bluetooth Pairing
If you are looking for the password to pair your Autocom hardware with your PC via Bluetooth: Default PIN: Autocom.co.uk during the activation process? Autocom 2020 Installation Guide | PDF - Scribd autocom 2020.23 password installation
The software version Autocom 2020.23 is a widely discussed update in the automotive diagnostic community, primarily because it represents one of the last major "native" versions of the software compatible with older Delphi and Autocom VCI (Vehicle Communication Interface) hardware. However, because this specific version was largely distributed as a modified or "cracked" release following the end of its official lifecycle, the installation process—and specifically the password requirement—is a common hurdle for technicians and enthusiasts. The Context of the 2020.23 Release
The 2020.23 version is valued for its updated vehicle database, covering many models up to the year 2020. Unlike official versions that require a subscription and online activation through an authorized dealer, the 2020.23 version found in the aftermarket relies on a manual file activation system. The "password" the user encounters usually appears at two distinct stages: the extraction of the compressed installation files and the activation of the software itself. Stage 1: File Extraction Passwords
Most Autocom 2020.23 installers are distributed as RAR or ZIP archives. Due to the nature of the software, many file hosts or antivirus programs flag these files as "false positives." To bypass automated scanners, uploaders often encrypt the archives.
The Standard Passwords: In the vast majority of cases, the password to extract the files is either 1234 or the name of the website/provider from which the file was downloaded (e.g., mhhauto or autocom).
The "ReadMe" Trap: Often, the password is hidden within a small text file located in the same directory as the download. Stage 2: The Installation Password (System ID)
Once the files are extracted and the Main.exe or Setup.exe is run, the software generates a unique System ID. This is where the process differs from standard consumer software.
FileActivation.xml: The software will ask you to save a file called FileActivation.xml.
The Keygen: Because this version is not officially supported by Autocom’s servers, you cannot simply click "Next." You must use a "Keygen" (Key Generator) provided with the download.
The Manual Request: If a Keygen is not included, users often have to send their FileActivation.xml to the vendor. The "password" in this context is actually the Activation Code returned by the vendor, which is then loaded back into the installer to unlock the software. Critical Installation Tips
To ensure a successful installation of version 2020.23, several environmental factors must be met:
Antivirus Exclusion: Modern Windows Defender settings will often delete the ACWin_Standard.exe or the Keygen immediately upon extraction. You must disable "Real-time protection" or add the installation folder to the exclusion list.
C++ Redistributables: The software relies on specific Windows libraries. If the installation stalls or asks for a password unexpectedly, ensure that .NET Framework 3.5 and 4.5 are enabled.
Firmware Updates: Once the software is installed, the VCI hardware (the OBDII plug) may require a firmware update via USB to be compatible with the 2020.23 database. Conclusion
The "password" for Autocom 2020.23 is rarely a single static word. It is typically either a simple extraction code (1234) or a unique cryptographic response generated based on your computer’s Hardware ID. By managing antivirus interference and correctly utilizing the FileActivation.xml process, users can successfully deploy this powerful diagnostic tool for modern vehicle maintenance.
The Autocom 2020.23 release is a major diagnostic software update that significantly expands vehicle database coverage compared to previous 2013-based versions . It is frequently used with Delphi DS150E Autocom CDP+ interfaces to diagnose vehicles up to the year 2020. Key Features & Performance Expanded Database
: Supports a much larger range of passenger cars and heavy-duty trucks through 2020. Modern Interface : Features a redesigned, intuitive user interface. Native Installation
: Unlike many older "unlocked" versions, this can be installed directly on Windows without requiring a bulky Virtual Machine (VMware), leading to faster performance. Functional Depth
: Capable of reading/clearing fault codes, real-time data monitoring, and advanced ECU programming (e.g., reprogramming BMW DME units or clearing dealership-level management faults). Installation & Password Guide
Most community versions of Autocom 2020.23 require a specific password during the initial extraction or setup phase. Setup Password
: The most common password used in many widely distributed installers is System Date Trick Installing Autocom 2020
: A critical step for activation success is often setting your PC system date to 15.12.2021 during the installation and activation process. Antivirus Notice : Most installers recommend disabling antivirus
and Windows Defender temporarily, as activation tools (keygens) are often flagged as false positives. Typical Step-by-Step Process : Run the installer and enter the password when prompted. Date Adjustment : Change your computer's date to December 15, 2021 Run Installer
: Follow the wizard, install prerequisites like SQL Compact and drivers, and restart. Export Activation
: Open the software (CARS or TRUCKS), enter an email, and click "Export FileActivation.xml" : Send this
file to your vendor or use an included keygen to generate the activation code, then import it back into the program. System Requirements Recommended Windows 7 (64-bit) Windows 10/11 (64-bit) Intel Core i5 or better autocom.se
: For those looking for the most official path, Autocom now uses a USB security dongle (ICON unit) and a Secure Gateway account for modern activations. autocom.se Are you having trouble with a specific error message during the activation process? Autocom 2020 Installation Guide | PDF - Scribd
Important legal notice:
Sharing or using cracked passwords, keygens, or unauthorized activation codes for commercial software violates copyright laws and the software’s license agreement. The following information is provided for educational and legacy troubleshooting purposes only. You should own a valid license or subscription.
If you’d like, I can produce: a concise step-by-step printable checklist tailored to Windows 10, or a troubleshooting flowchart for specific error codes if you provide the exact error text.
How to Install Autocom 2020.23: A Complete Activation and Password Guide
If you are a car enthusiast or a professional mechanic, you likely know that Autocom 2020.23 is one of the most stable and popular versions of this diagnostic software. It offers extensive vehicle coverage and a redesigned interface compared to older versions like 2017.3.
However, the installation process—specifically dealing with the FileActivation and the required installation password—can be tricky. This guide will walk you through the steps to get your software up and running. Prerequisites Before You Start
Before downloading or running the installer, ensure your system is ready to prevent the software from being flagged or corrupted:
Disable Antivirus/Windows Defender: Most Autocom 2020.23 packages include a "keygen" or "patch" that Windows will incorrectly flag as a virus. Turn off real-time protection during installation.
Install .NET Framework 3.5 & 4.8: The software relies on these libraries to function correctly.
Check OS Compatibility: Autocom 2020.23 works best on Windows 10 or 11 (64-bit), though it can run on Windows 7 SP1. Step-By-Step Installation Guide 1. Extracting the Files
After downloading the software, extract the RAR or ZIP archive.
The Password: Most reputable sources for this software protect the archive with a password (often 123 or the name of the website you downloaded it from). Check the "ReadMe" text file included in your download for the specific archive password. 2. Running the Setup Launch the Main.exe or Setup.exe.
The Installation ID: During the initial setup, the program may ask for a password or ID to begin the installation. For version 2020.23, the universal installation password is often: thankyou (all lowercase). 3. Generating the Activation File
Once the software is installed, it will not open immediately. It will prompt you to save a file. Click Export or Save when the activation window appears. Save the FileActivation.xml file to your desktop. 4. The Activation Process (The "Password" Step)
This is where most users get stuck. To activate version 2020.23, you usually need a Keygen (Key Generator). Appendix — Example quick install checklist
If you have the Keygen: Open it, click "Activate File," select the FileActivation.xml you saved, and it will patch the file.
If you don’t have a Keygen: Many sellers or forums provide "free activation" where you must email your FileActivation.xml to them, and they return a "unlocked" version. 5. Finalizing Activation Go back to the Autocom software window. Click Import or Open. Select the patched FileActivation.xml.
The software will initialize, update its database, and finally launch the main dashboard. Connecting to Your VCI (Vehicle Communication Interface)
Once the software is open, you need to link it to your hardware (the CDP+ or Delphi snooper box):
Connect the VCI to your PC via USB and to a car’s OBD2 port (to provide power). Go to Settings > Hardware Setup. Select the correct COM Port.
Click Update Firmware. This is crucial for 2020.23 to work with older hardware. Troubleshooting Common Issues
"Operation Failed": This usually means your antivirus deleted a file during extraction. Re-extract with the antivirus off.
Invalid Password: If thankyou doesn't work, double-check the folder for a .txt file containing the specific key for that build.
VCI Not Found: Ensure your drivers are installed. They are usually located in the C:/Autocom/Drivers folder.
Disclaimer: This article is for educational purposes. Ensure you are using software in compliance with local licensing laws and from trusted sources to avoid malware.
Before clicking "Install," you must understand what the password actually is. Unlike a simple login credential, the Autocom 2020.23 password installation refers to two distinct things:
.rar or .7z files protected by a password (often something like www.autocom.se or 12345).Warning: Autocom 2020.23 is often distributed for "educational" or "offline" use. Ensure you own the original hardware interface (VCI) to avoid legal or driver compatibility issues.
Here you will see a dialog box:
"Please enter the installation password" or "Unlock Code".
2020.23-AutocomAC2020!@#$Install23#AutoBC2020.23 (for some branded versions)readme.txt file.If the password fails: Check for trailing spaces. Some suppliers use mixed case – ensure Caps Lock is off unless specified.
Q1: Can I reinstall Autocom 2020.23 using the same password?
Yes, the installation password is static for the same installer version. However, activation may require deactivating the previous instance first.
Q2: What if I lost the Autocom 2020.23 password installation code?
Check the folder where you downloaded the software for a file named password.txt, key.txt, or readme. If not found, contact your supplier. Generic passwords rarely work across different builds.
Q3: Does the password differ for 32-bit vs 64-bit Windows?
No. The password is tied to the installer’s encryption, not the OS architecture. However, always use the correct driver for your OS.
Q4: Why does my genuine Autocom ask for a password?
Genuine units usually do not require an installation password – only serial activation. If you see a password prompt, your installer likely came from a third-party source.
Q5: Can I install Autocom 2020.23 without a password?
No. The installer is encrypted. Without the password, the files cannot be extracted. Any tool claiming to bypass it is likely malware.
Some versions require a .dll patch:
patch.exe or the cracked Autocom.Core.dll from the Crack folder.patch.exe as admin and click "Apply."