Leo’s old Apeman A77 sat on the dashboard, a faithful but aging witness to his daily commutes. It had its quirks—the occasional flickering screen and a stubborn refusal to work as a webcam—but it was his "reliable veteran."
One rainy Tuesday, Leo stumbled upon an announcement in the Apeman Action Camera Club about a new V6 firmware update. The promise was simple: a "Webcam Mode" for the A77. Intrigued, Leo decided it was time for his veteran to learn a new trick. The Preparation
Following the Apeman A77 Instruction Guide, Leo made sure everything was ready:
Power Up: He plugged the camera into a stable power source to avoid a mid-update blackout.
SD Card Prep: He formatted the SD card within the camera's own menu system to ensure it was "perfectly readable."
The File: Since the V6 firmware wasn't a standard download, Leo reached out to the official Apeman Support email. Soon, he had the firmware.bin file ready on his computer. The Ritual
Leo copied the firmware file to the root directory of his microSD card. He felt a bit like a digital surgeon as he slid the card back into the camera.
Holding his breath, he turned it on. A small notice popped up on the tiny screen: Update Firmware? He clicked "Yes." The screen went dark, and for a few tense minutes, Leo watched the status light flicker. He remembered the advice from the YI Dash Cam Update Guide—never interrupt the power during this critical phase. The Transformation
Finally, the camera beeped and rebooted. Leo quickly checked the settings. The flickering was gone, and more importantly, a new option appeared when he connected it to his PC. He selected PC Cam mode (as shown in similar model tutorials).
He opened his computer's camera app, and there it was—his trusty dashboard companion was now his sharpest webcam. The "reliable veteran" had successfully been reborn for the digital age. Next StepsIf you're planning your own update, let me know: What is your current firmware version? Do you have a microSD card reader ready?
The Apeman A77 action camera does not have a public, automated "over-the-air" update system. Because different hardware versions of the A77 exist, installing the wrong firmware can permanently "brick" your device (render it unusable).
Updating the firmware generally requires contacting Apeman directly to receive the specific file for your camera's version. Step 1: Identify Your Current Version
Before requesting an update, you must find your camera's current firmware version to ensure compatibility: Turn on your Apeman A77. Go to the Setup/Settings menu (gear icon). Scroll down to Version. Write down the code (e.g., V6.1.0.1-B). Step 2: Contact Apeman Support
Official firmware files are not hosted on the public Apeman Download Center for this specific model. You must request the correct file via email: Email: support.ac@apemans.com Include in your email: The model name (A77). Your current Firmware Version (from Step 1).
The reason for the update (e.g., "want to use webcam mode" or "fixing Wi-Fi issues"). Step 3: Installation Process (General)
Once support sends you the .bin file, the update usually follows these steps: Format a MicroSD card (FAT32) on your computer. apeman a77 firmware update
Copy the firmware file (e.g., firmware.bin) directly to the root directory of the SD card (do not put it in a folder). Ensure your camera is fully charged or connected to power. Insert the SD card into the turned-off camera.
Power on the camera. It should automatically detect the file and ask if you want to update. Wait. Do not touch any buttons until the camera restarts. Why Update?
Webcam Mode: Newer firmware (V6 or higher) allows the A77 to be used as a high-quality Webcam for PC/Mac.
App Compatibility: Certain versions are required to connect to the official Apeman App for video editing and remote control.
Warning: Never attempt to install firmware intended for a different model (like the A79 or A80) or a different hardware version of the A77, as this will disable the camera. AI responses may include mistakes. Learn more
Good news ! We have firmware for A77 V6 version ... - Facebook
Keeping Your Gear Current: A Guide to the Apeman A77 Go to product viewer dialog for this item. Firmware Update
Whether you're looking to unlock the webcam mode feature or ensure your camera is compatible with the latest Apeman mobile apps , keeping your Apeman A77 action camera updated is essential for peak performance. Before You Start: A Critical Warning
Before proceeding, it is important to note that Apeman officially advises against updating your firmware if your camera is currently working without issues. An unsuccessful upgrade can permanently damage the camera, and such damage is typically not covered under warranty. How to Get the Right Firmware Unlike some devices with a universal update file, the Apeman A77
has several different hardware versions. To ensure you receive the correct file, you must:
Check your current version: Find the firmware version in your camera's settings menu.
Contact Support: Email the Apeman customer service team at support.ac@apemans.com with your current version number. They will provide the specific download link tailored to your device.
Official Request Page: You can also submit a request via the Apeman Download Portal by selecting your model and providing your email. Step-by-Step Update Instructions
Once you have received the correct firmware package from the Apeman support team, follow these steps to install it:
Prepare the Files: Download and unzip the firmware package on your computer. Leo’s old Apeman A77 sat on the dashboard,
Format Your SD Card: Use your computer to format the TF (microSD) card to ensure it is clean.
Transfer Firmware: Copy the unzipped firmware file directly onto the formatted TF card. Initiate Update: Insert the card into your camera. Turn the camera on.
Wait for the "APEMAN" logo to appear. Note: During the 2–3 minute update process, the screen will remain dark.
Finalize: Once the camera turns back on automatically, use the camera's internal menu to format the card again before normal use. App Compatibility Requirements
If you are updating specifically to use the mobile app, keep these version requirements in mind:
Standard Apeman App: Requires firmware version V6.1.0.1-B or higher.
Legacy App (iSmartDV): Used for older A77 firmware versions.
DV KING 4K: Recommended for units running V6.1.0.1-B or higher.
Do you need help finding your current firmware version in the camera's menu system?
Good news ! We have firmware for A77 V6 version ... - Facebook
Updating the Apeman A77 firmware is essential for modern features like Webcam Mode or ensuring compatibility with newer mobile apps
. Unlike many modern cameras with automatic over-the-air updates, the A77 often requires a more manual approach. The "Story" of Your Update: Step-by-Step 1. Check Your Current Version Before starting, confirm if you actually need an update. Via the App : Connect your camera to the Apeman App via Wi-Fi. Navigate to Settings > Update to see the current system firmware version. Version Milestone : If your firmware is V6.1.0.1-B or higher , you should use the DV KING 4K app. Older versions typically use 2. Request the Firmware File
Apeman does not always host a direct, public download link for every specific A77 revision. Contact Support
: The most reliable way to get the correct version (especially for the V6 webcam update) is to email support.ac@apemans.com Manual Form : You can also use the Apeman US Download Portal
, where you may be prompted to leave your email for the specific model's firmware. 3. Perform the Manual Flash Once you receive the firmware (usually a file), follow these steps: Prepare the SD Card Typical changelog items
: Format a Class 10 Micro SD card (up to 64GB) directly inside the camera to ensure the file system is correct. : Use a card reader to copy the firmware file to the root directory (not inside any folder) of the SD card.
Ensure the camera is fully charged or plugged into a power source. Insert the SD card into the powered-off camera.
Power the camera on. It should automatically detect the file and begin the update (often indicated by blinking LEDs). Do not turn off the camera during this process. Final Step : Once finished, the camera usually restarts. Delete the firmware file
from the SD card afterward; otherwise, the camera may try to update again every time you turn it on. Key Features Added in Recent Updates Webcam Mode
: Enables the A77 to be used as a high-quality USB webcam for PCs. App Stability
: Fixes connection issues with newer Android and iOS versions.
: Resolves common "crashes" or "freezing" that previously required a battery pull to reset.
Good news ! We have firmware for A77 V6 version ... - Facebook
The most common cause of a failed Apeman A77 firmware update is an improperly formatted SD card.
This is a critical step. The internet is filled with third-party sites offering firmware, but many of them host outdated or corrupt files. Always use official sources.
Official Download Locations:
www.apeman.com and navigate to the “Support” or “Download” section. Search for “A77 Dash Cam.”support@apeman.com with your current firmware version and serial number. They will typically email you the correct .bin file within 24-48 hours.Warning: Avoid websites offering “cracked” or “modified” firmware for the Apeman A77. These can permanently damage your device and void any warranty.
Comparison with competitors:
The A77’s update process is clunkier than a GoPro (which does OTA updates) but similar to other budget cams (Akaso, Dragon Touch). Apeman’s support response time averages 3–5 days.
Even with perfect steps, things can go wrong. Here are the most common issues and how to fix them.