Evolution 9780z5 Driver Link ^new^ - Actia Psa Xs

18;write_to_target_document1a;_s8bsaaDXGejU1sQPnOucoAE_10;56;

18;write_to_target_document1a;_s8bsaaDXGejU1sQPnOucoAE_20;56;

The ACTIA PSA XS Evolution (9780Z5) is the standard diagnostic interface used for Peugeot and Citroën vehicles. To get this hardware working on a modern PC, you typically need to manage two components: the VCI driver and the Diagbox software. 0;16; 🛠️ Official & Support Resources 0;16;

While ACTIA provides generic drivers for its commercial interfaces, most "9780Z5" units are clones or legacy devices that require specific Diagbox-compatible drivers. 0;16;

Official ACTIA IME Support: You can find the generic XS Family Drivers0;402; for Windows 10 and 11 on the official ACTIA site. These are generally used for the "Lite XS" or "Basic+ XS" professional tools.0;40e;

Peugeot/Citroën Service Box: Official Diagbox installation guides0;41c; are available for independent shops with a license0;9bf;. 0;2a;

18;write_to_target_document7;default0;584;18;write_to_target_document1a;_s8bsaaDXGejU1sQPnOucoAE_20;a5; 💻 Installation Guide for Windows 10/11 0;16;

For the interface to be recognized by Diagbox (v7.xx, v8.xx, or v9.xx), follow these general steps: 0;16; 0;905;0;554;

Driver Execution: Locate the ACTIAPnPInstaller.exe (often included in the Diagbox installation package). Run this as an Administrator before plugging in the USB cable.

Hardware Connection:0;411; Plug the interface into a USB 2.0 port. Check Device Manager; it should appear under "Universal Serial Bus controllers" as ACTIA USB Devices or USB Com Board Driver (Multi-instance).

Firmware Version:0;80;0;410; Most modern Diagbox versions (like v7.83 or v9.85) will automatically attempt to update the interface firmware to v4.3.x.

Note: If your hardware is a "Reference B" clone, it may fail to work with versions above Diagbox 5.29 unless it is reflashed to "Reference C".

Interface Checker: Use a tool like PSA Interface Checker to verify if the serial number is recognized by the PC. If it is "Not Detected," the driver is likely blocked by Windows Core Isolation or Driver Signature Enforcement. 0;2a;

18;write_to_target_document7;default0;992;18;write_to_target_document1a;_s8bsaaDXGejU1sQPnOucoAE_20;a5; ⚠️ Technical Tips 0;16;

Virtual Machines: Because the drivers are legacy, many users prefer a pre-configured VMware image (usually Windows 7 32-bit) which already has the drivers and Diagbox pre-installed to avoid Windows 10 compatibility issues. actia psa xs evolution 9780z5 driver link

Internet Connection:0;c2a; Always disable your internet connection when running older (non-official) versions of Diagbox to prevent the software from blacklisting your interface serial number. 0;2a;

18;write_to_target_document7;default0;67d;18;write_to_target_document1a;_s8bsaaDXGejU1sQPnOucoAE_20;7bd;

18;write_to_target_document7;default18;write_to_target_document1a;_s8bsaaDXGejU1sQPnOucoAE_20;4c5a;

18;write_to_target_document7;default0;a1;0;a1;18;write_to_target_document1a;_s8bsaaDXGejU1sQPnOucoAE_20;a5;

18;write_to_target_document1b;_s8bsaaDXGejU1sQPnOucoAE_100;57; PSA XS Evo driver help | Peugeot Forums

Here’s a draft piece for the Actia PSA XS Evolution 9780Z5 driver link, structured for a technical support or documentation context.

Title: Actia PSA XS Evolution 9780Z5 – Driver & Setup Link

Applies to:
Actia PassThru XS Evolution interface (Model: 9780Z5)
Used with PSA (Peugeot/Citroën/DS/Opel) diagnostic software

Objective:
Download and install the correct USB driver to enable communication between the 9780Z5 interface and Windows-based diagnostic applications (e.g., DiagBox, PP2000, Lexia).

Step 1: Understanding the Hardware

Before plugging in the device, it is important to understand that the XS Evolution works differently than cheaper ELM327 interfaces. It utilizes a specific USB-to-Serial protocol that requires proprietary drivers to function.

If you plug the device in and Windows attempts to install a generic driver, let it fail. You will need to install the manufacturer drivers manually.

2. The Driver Requirement

This interface requires a specific USB driver to communicate with the Windows operating system. Without this driver, the Diagbox software will fail to detect the interface, usually displaying the error: "Interface not found" or "Communication error."

Review: ACTIA PSA XS Evolution 9780Z5 Driver Link

Overview

Build & Hardware

Software & Driver

Functionality

Performance

Pros

Cons

Who it’s for

Bottom line

Related search suggestions (to refine or expand your review)

This content is structured to inform users about the device, the driver requirements, and the risks involved in downloading files for this hardware.

Guide: Actia PSA XS Evolution (9780Z5) Driver & Setup

The Actia PSA XS Evolution (often identified by part number 9780Z5) is a professional-grade diagnostic interface widely used by Peugeot and Citroën dealerships and independent garages. It allows for deep communication with the vehicle’s ECU for diagnostics, coding, and telecoding.

Unlike modern "Plug-and-Play" devices, installing this specific tool requires careful driver management.

⚠️ Common Issues & Fixes

| Problem | Solution | |---------|----------| | Driver not found | Disable driver signature enforcement (Windows 10/11) and retry. | | Interface not detected | Use a different USB cable or port (USB 2.0 preferred). | | Diagnostic software can’t connect | Set correct COM port in software settings; match baud rate (usually 115200). |

Last updated: [Insert date]
Support contact: Actia support portal or your diagnostic tool provider.

ACTIA PSA XS Evolution (9780.Z5) is a vehicle communication interface (VCI) used for dealer-level diagnostics on Peugeot and Citroën vehicles via Driver Download and Installation Title: Actia PSA XS Evolution 9780Z5 – Driver

Drivers for this hardware are typically bundled with the DiagBox software suite rather than being standalone downloads. Official Support

: The official ACTIA IME support portal provides general drivers for the "XS Family" (Basic+ XS, Lite XS). These drivers are often required for the hardware to be recognized by modern Windows systems. ACTIA Support Portal : Download the Lite XS Level X driver

(e.g., Version 2.8.1.11 or later) for compatibility with Windows 10 and 11. DiagBox Bundled Drivers

: When installing DiagBox (versions like 7.xx or 9.xx), a "PSA VCI Driver" is usually included in the installation folder. You must often run this specific driver setup as an administrator the main software installation but plugging in the VCI. Device Recognition

: If the device is correctly installed, it should appear in the Windows Device Manager under "Universal Serial Bus controllers" as an ACTIA USB Devices Compatibility and Firmware OS Support

: Modern versions (DiagBox 9.85+) are designed for Windows 10 and 11 (64-bit). Older versions (DiagBox 7.xx) often require a 32-bit environment or a Virtual Machine (VM). Firmware Version

: For full functionality with DiagBox 7.xx, the adapter firmware should ideally be version

. The software often attempts to update the firmware automatically upon first connection. Hardware Variants

: Be aware that many 9780.Z5 units are "clones." "Reference C" versions are generally more stable with DiagBox 7.xx and newer than the older "Reference B" units. AliExpress Common Installation Issues Actia Psa Xs Evolution Download Windows - Facebook

Step 3: Manual Installation Guide

If Diagbox did not install the drivers automatically, follow these steps:

  1. Extract the Files: If you have the driver ZIP file, extract it to a folder on your desktop.
  2. Open Device Manager: Plug in your XS Evolution interface. Press Windows Key + X and select Device Manager.
  3. Locate the Device: You will likely see a device listed under "Other Devices" or "Universal Serial Bus Controllers" with a yellow exclamation mark. It might be labeled simply as "ACTIA" or "XS Evolution".
  4. Update Driver: Right-click the device and select Update Driver.
  5. Browse My Computer: Select Browse my computer for drivers.
  6. Select Folder: Point the browser to the folder where you extracted the driver files (ensure "Include subfolders" is checked).
  7. Install: Windows should locate the appropriate .inf file and install the interface.

Q: Do I need the driver if I use a virtual machine (VM)?

A: Yes. You must assign the USB device to the VM (e.g., VirtualBox or VMware) and then install the driver inside the guest OS (Windows 7 or 10).

Where NOT to Look for the Driver

Avoid these common misleading sources:

Instead, always verify the checksum of the .sys file. A legitimate 9780z5 driver should have a digital signature from “Actia S.A.” or “FTDI Ltd.”