4g-lte-5m-h05-c01-mv2.219
Based on the alphanumeric string provided, this appears to be a specific module or firmware revision identifier for a 4G LTE communication module, most likely manufactured by Fibocom or a similar IoT hardware vendor.
Here is a technical write-up covering the analysis of the identifier 4g-lte-5m-h05-c01-mv2.219.
2.3 A Developer Board or Test Jig
c01 as “Carrier 01” is common in evaluation kits: the main board for testing an LTE modem. mv2.219 then refers to the test firmware version.
1. Hardware Context & Specifications
While specific datasheets require the exact manufacturer, devices tagged with h05 and 5m usually fall into the category of industrial-grade modems (such as those based on Qualcomm or MediaTek chipsets, or specific brands like Digi, Sierra Wireless, or Wistron NeWeb).
Typical Hardware Profile:
- Form Factor: Often Mini PCIe or M.2 (NGFF), designed for integration into routers or industrial PCs.
- LTE Categories: Likely LTE Cat-4 to Cat-6 (standard industrial throughput).
- Interfaces:
- USB 2.0/3.0 (for data and diagnostics).
- UART (for AT command control).
- SIM Slot interface.
- Antenna Interfaces: Main (MIMO 1), Diversity (MIMO 2), and potentially GPS/GNSS.
Key Consideration: The h05 tag implies a specific board layout. If you are replacing a module, you must ensure the pinout matches the previous hardware revision (e.g., h04), as power rails or USB lane routing may differ.
1.1 4g-lte – The Air Interface
This prefix unambiguously specifies the cellular generation: 4th Generation Long-Term Evolution. LTE is the global standard for high-speed wireless data, offering downlink speeds up to 1 Gbps (in LTE-Advanced Pro) and low latency (10–30 ms).
Implication: Any device carrying this label is designed to operate on LTE bands (e.g., B1, B3, B5, B7, B20, B28, B40, B41). It is not 5G or 3G.
Summary
4g-lte-5m-h05-c01-mv2.219 identifies a 4G LTE IoT module in an LCC form factor, running hardware revision H05 and firmware version 2.219. It is likely a component in an industrial router or IoT gateway, manufactured by a vendor such as Fibocom, designed for reliable mid-speed cellular data transmission.
Based on the technical designation 4G-LTE-5M-H05-C01-MV2.219 , this is a 5MP 4G LTE-capable camera module
. It is typically found in high-resolution outdoor security systems and DIY IoT projects requiring standalone cellular connectivity. Overview of 4G-LTE-5M-H05-C01-MV2.219
This module is a core component for 5-megapixel (5M) cameras that operate over the 4G LTE network
. The "MV2.219" suffix usually denotes a specific hardware version or firmware iteration (v2.219) used in manufacturing to ensure compatibility with modern 4G bands. Stella Doradus Key Technical Specifications Resolution
: 5MP (2560 x 1920), offering significantly sharper detail than standard 1080p modules. Connectivity : Integrated 4G LTE Cat 4
support, enabling downlink speeds up to 150 Mbps and uplink speeds up to 50 Mbps. Lens Compatibility
: Standard M12 mount or built-in wide-angle options (often around 4.0mm). Power Efficiency
: Designed for low-power operation, often compatible with 5V solar-charging systems or 3.7V lithium batteries. Performance Review Image Quality
: The 5MP sensor provides excellent clarity for facial recognition and license plate identification at a distance. Signal Reliability
: Users of similar 4G modules report stable connections even in remote areas where Wi-Fi is unavailable. Night Vision Support 4g-lte-5m-h05-c01-mv2.219
: Compatible with IR and full-color night vision LEDs, ensuring clear footage in complete darkness. Versatility
: Its small form factor makes it suitable for various housings, from PTZ (Pan-Tilt-Zoom) dome cameras to compact "bullet" styles. Comparison with Similar Modules 4G-LTE-5M Module Standard 2MP 4G Module Max Resolution 5MP (2560x1920) 2MP (1920x1080) Storage Need Higher (H.265 recommended) Lower (H.264 sufficient) 4G LTE Cat 4 4G LTE Cat 1 or 4 Typical Use High-security surveillance General monitoring
DDLC 5MP 4G SIM LTE Wireless Outdoor PTZ Security Camera | SIM Based PTZ CCTV Camera | Full HD | 360° Pan Tilt | Color Night Vision | Motion Detection
The identifier 4g-lte-5m-h05-c01-mv2.219 appears to be a specific firmware version or a hardware SKU for a 4G LTE mobile router or "MiFi" device. While a specific "deep piece" (likely referring to a detailed technical breakdown, firmware binary, or specific hardware component) is not available in public technical documentation, it follows naming conventions often associated with ZTE, Huawei, or white-label CPE (Customer Premises Equipment) manufacturers.
If you are looking for technical support or parts for this specific unit, here is how to identify and proceed: Identifying the Device
Carrier Specifics: This alphanumeric string is frequently found on the sticker underneath the battery or on the back plate of mobile hotspots provided by carriers like T-Mobile, Verizon, or international providers.
Manufacturer: Check the device for logos from manufacturers like Huawei or TP-Link, as they use similar versioning for their LTE modules. Accessing Technical Details
If you need a "deep piece" of information like the firmware or manual, you can typically find it by accessing the device's web interface: Connect your computer or phone to the device's Wi-Fi.
Enter the default IP address (commonly 192.168.0.1, 192.168.1.1, or 192.168.8.1) into a web browser.
Log in using the credentials on the device label (often admin / admin).
Navigate to Settings > Device Information to see the full hardware version and software build details. Troubleshooting & Manuals
For setup or resets, most devices in this category follow standard procedures found in guides like the TP-Link 4G Router Guide or the Gaestopas 4G LTE User Guide.
Could you clarify if you are looking for a physical replacement part, a firmware download, or a technical datasheet for this specific version?
If you're looking for information on:
-
Device Specification: If this string is a model number, it might be specifying a particular device used for cellular connectivity, such as an LTE module. The breakdown could imply:
- 4G-LTE: The device supports 4th generation Long-Term Evolution technology, which is a standard for wireless broadband communication for mobile devices.
- 5M: Could refer to a specific variant or configuration, possibly related to the device's firmware, hardware version, or regional specification.
- H05: Might denote a hardware version, a specific model line, or a protocol version.
- C01: Could indicate a specific configuration, region, or hardware revision.
- MV2.219: Might refer to a firmware version, a software revision, or another form of device identifier.
-
Full Piece or Details: If you're asking for the full piece or details about this device, it would be helpful to know the manufacturer or more about its application (e.g., IoT, industrial use, automotive).
To get more accurate information, you might want to:
- Check the manufacturer's website or documentation.
- Look for technical specifications or datasheets.
- Search for forums or communities discussing this device.
4G-LTE-5M-H05-C01-MV2.219 is a 5-megapixel (5MP) 4G LTE-capable camera module commonly found in high-resolution outdoor security surveillance systems. It is frequently used in DDLC 5MP 4G SIM wireless outdoor PTZ security cameras Key Specifications & Performance Resolution Based on the alphanumeric string provided, this appears
: 5MP, providing high-definition image quality for detailed monitoring. Connectivity
: Integrated 4G LTE support, allowing for remote operation in areas without Wi-Fi. Data Speeds : Supports downlink speeds up to and uplink speeds up to Lens Compatibility
: Designed for standard M12 mounts or built-in wide-angle lenses. Common Applications
: Security surveillance, general monitoring, DIY IoT projects, and vehicle telematics for fleet tracking. General Review & Use Cases
Reviewers often categorize this module as a reliable choice for standalone cellular connectivity
in security systems. Because it operates on 4G LTE networks—which are expected to remain operational until at least 2030—it is considered a future-proof option for current outdoor installations. It is particularly effective for remote sites where wired internet is unavailable, though users should ensure strong cellular coverage to maintain stable 5MP video streaming. www.compareinternet.com Are you looking to use this module for a DIY project or as a replacement part for a specific camera brand
Is 4G Dead? What You Need to Know About 4G in 2025 - Compare Internet
The code 4G-LTE-5M-H05-C01-MV2.219 identifies a specific hardware revision and firmware version for a 4G LTE CPE (Customer Premises Equipment) router, often associated with industrial or budget-friendly wireless gateway manufacturers like MTK (MediaTek) or ZTE/Huawei white-label variants.
This designation typically breaks down into the following technical architecture: Technical Component Breakdown
4G-LTE: Indicates the primary cellular technology support, generally Category 4 (Cat4) providing up to 150Mbps downlink and 50Mbps uplink.
5M: Refers to the internal antenna configuration or specific frequency band optimizations (often 5-mode support).
H05-C01: This is the hardware board revision code. It signifies the physical layout of the PCB, the integrated circuits (ICs) used, and the port configuration (typically 1 LAN/WAN port and dual external antenna SMA connectors).
MV2.219: The specific firmware build version. This version controls the web interface, security protocols (WPA2/WPA3), and carrier-specific APN settings. Hardware Architecture and Capabilities
Routers using this specific board revision (H05-C01) are generally designed for:
Reliability in Remote Sites: Used frequently for M2M (Machine to Machine) communication, CCTV backup, or rural broadband.
MediaTek Chipsets: Often built on the MT7628 or similar platforms, which offer stable Wi-Fi 4 (802.11n) at 300Mbps.
Voltage Support: These units usually support a wide power input range (9V-12V DC), making them suitable for automotive or solar-powered installations. Common Use Cases
Rural Internet Access: Deploying high-speed internet in areas lacking fiber or DSL infrastructure. Form Factor: Often Mini PCIe or M
Industrial IoT: Connecting sensors and monitoring equipment to the cloud via a cellular backbone.
Failover Solutions: Providing a secondary internet source for small businesses if their primary cable or fiber line goes down. Maintenance and Troubleshooting
If you are managing a device with this specific firmware (MV2.219), keep the following in mind:
Interface Access: Typically reachable via 192.168.100.1 or 192.168.1.1 using standard admin credentials found on the device sticker.
Firmware Updates: Unlike consumer-grade Netgear or ASUS routers, these white-label devices rarely receive "over-the-air" (OTA) updates. Updating usually requires manually flashing a .bin file provided by the direct vendor.
Antenna Positioning: To maximize the MV2.219 software's signal processing, ensure external SMA antennas are oriented vertically and away from large metal objects. AI responses may include mistakes. Learn more
The string 4g-lte-5m-h05-c01-mv2.219 refers to a high-gain 4G LTE multi-band antenna primarily manufactured by Sirio Antenne
Based on the product code components, this specific "piece" is identified as: Sirio HGO 4G LTE 5m
: A multi-band base station antenna designed for improved LTE low-band coverage Sirio Antenne : Features a 5-meter (approx. 16.4 ft) low-loss cable Sirio Antenne Frequency Range
: Covers 790–960 MHz and 1710–2700 MHz, making it compatible with GSM, UMTS, and WLAN systems Moonraker Online
: Protected by UV-stabilized thermoplastic for durability in both indoor and outdoor settings Moonraker Online : Typically comes with an Moonraker Online Availability and Retailers
You can find this antenna or its variants at specialized networking and radio retailers: Sirio Antenne official product page lists the HGO 4G LTE series with various cable options Sirio Antenne : Often carries the Sirio HGO 4G LTE 5m for approximately $60.95 - $71.95 Moonraker Online Secondary Markets : Listings for new and used units frequently appear on HGO 4G LTE Improved - Sirio Antenne
: HGO 4G LTE 50cm cable | row: | Product Number:: 2154004/5CO | : HGO 4G LTE 5m cable Sirio Antenne
It looks like you’re providing a part number or configuration string — possibly for a cellular module, IoT device, or networking component.
Could you clarify what kind of “piece” you need? For example:
- A technical datasheet for that module
- A schematic symbol or footprint (for PCB design)
- A quote/pricing from distributors
- A replacement/compatible part number
- A mechanical drawing (dimensions, pinout)
If this is from a specific manufacturer (e.g., Sierra Wireless, Telit, Quectel, u-blox), sharing that would help. The string 4g-lte-5m-h05-c01-mv2.219 looks like it might include band config (5m?), hardware revision (h05), firmware (mv2.219), or a custom SKU.
Let me know, and I’ll get you the exact piece of information you’re looking for.
However, such a structured alphanumeric string is highly characteristic of an internal engineering model number, a custom firmware version, a production batch code, or a prototype identifier used within a specific manufacturing or R&D environment.
Below is a detailed analytical article that deconstructs the possible meaning of this code based on standard engineering nomenclature patterns from the cellular, IoT, and embedded systems industries.
