13fe Usb Disk 50x Usb Device

From the naming pattern, 13fe is likely a USB Vendor ID (VID). In the USB specification, 13fe is typically assigned to Phison Electronics Corp. — a controller manufacturer, not a retail brand. 50x might refer to a product family or firmware version.

So what you’re likely describing is a generic/white-label USB flash drive (possibly counterfeit or low-cost) using a Phison controller and generic flash memory — common on eBay, AliExpress, Amazon Marketplace, or local flea markets.

Compatibility

  • Operating Systems: The device would likely be compatible with a range of operating systems, including Windows, macOS, and Linux, given the widespread support for USB storage devices.

What Does "13fe USB Disk 50x USB Device" Actually Mean?

The string is not random gibberish. It follows a strict naming convention used by Windows Plug and Play drivers. Let’s break it down:

  • 13fe : This is the Vendor ID (VID). In USB terminology, every manufacturer is assigned a unique hexadecimal code by the USB Implementers Forum. The VID 13fe belongs exclusively to Phison Electronics Corp. , a Taiwanese company that designs and manufactures USB flash drive controllers. Phison does not typically sell finished USB sticks to consumers; instead, they sell the internal controller chip to other brands.

  • USB Disk : This indicates the device class. It is a mass storage device.

  • 50x : This is the Product ID (PID) or a model variant. For Phison, the 50x series commonly refers to older controller chips like the PS2250 or PS2251 series. These are widely used in budget-friendly USB 2.0 and early USB 3.0 drives.

  • USB Device : Confirms the connection interface.

When you see 13fe USB Disk 50x USB Device, you are looking at a USB flash drive powered by a Phison controller, typically found in generic, promotional, or value-brand USB sticks from the late 2000s to mid-2010s. 13fe usb disk 50x usb device

Common Driver and Recognition Issues

Despite being a mass storage device, the 13fe USB Disk 50x USB Device can sometimes fail to work properly. Here are the most frequent problems users report:

Final verdict

“13fe usb disk 50x usb device” is not a product — it’s a red flag.
Avoid unless you need a disposable, risky drive for testing USB recovery tools. For any real use, spend $3–5 more for a reliable, branded USB drive.

Would you like help identifying the exact drive you have (by reading the USB VID/PID from your system)?

The "13fe usb disk 50x usb device" identifier relates to USB flash drives utilizing Phison controllers (Vendor ID 13FE). These drives commonly encounter "No Media" or "Device Descriptor Request Failed" errors when the internal firmware or hardware fails. Troubleshooting often involves driver updates, changing USB ports, or using specialized flashing tools to address corruption. For a breakdown of common issues, see Spiceworks Community. Flash Drive No Media Error - Hardware & Infrastructure

A "13FE USB DISK 50X USB Device" typically indicates a Phison-based USB flash drive that is experiencing a firmware or hardware failure Spiceworks Community

. When your computer identifies a drive this way, it is often in "service mode" or "bootloader mode" because the operating system cannot communicate with the actual flash memory chips Spiceworks Community Common Symptoms "No Media" Status:

The drive appears in Device Manager or Disk Management, but shows "0 MB" or "No Media" Spiceworks Community Write Protection: From the naming pattern, 13fe is likely a

You may see a "Current Read-only State: Yes" error, making it impossible to format or save files Spiceworks Community Unknown Disk ID: Commands like might show a Disk ID of all zeros ( Spiceworks Community Troubleshooting & Fixes 1. Basic Logic Reset

Try these standard steps first to rule out simple software glitches: Diskpart Reset: Command Prompt to clear attributes. Identify your USB (e.g., Disk 2) and type select disk 2 attributes disk clear readonly Registry Edit: Navigate to

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies and ensure the WriteProtect value is set to 2. Advanced: Reflashing Firmware (MPALL) If basic fixes fail, the internal Phison controller

(identified by the "13FE" VID) likely needs its firmware reflashed Identify Your Controller: Use a tool like ChipGenius to find the specific Phison model (e.g., PS2251-07) Use Phison MPALL:

This is a mass production tool used to "re-burn" the firmware onto the drive. Note that this is a technical process and will permanently erase all data on the drive 3. Hardware Evaluation

If the drive still shows "No Media" after firmware attempts, the NAND flash chip inside has likely physically failed Spiceworks Community . In this case: The drive is typically unrecoverable through software. Check if it is under warranty with manufacturers like Silicon Power , which frequently use these Phison controllers Kingston Technology

If you decide to try reflashing, I can help you find the specific MPALL version Burner File if you provide the from your Device Manager properties. Flash Drive No Media Error - Hardware & Infrastructure Compatibility

Device manager is showing “13FE USB DISK. Status : No Media. Path : 0. Clustered Disk : No. There are no volumes. Spiceworks Community

USB having 0space after interrupted formatting. - Microsoft Q&A

The 13FE USB DISK 50X USB Device is a generic hardware identifier often found in Windows Device Manager for flash drives utilizing a Phison Electronics Corp. controller. While the "13FE" specifically refers to the Phison Vendor ID (VID), this designation is frequently associated with drives from major brands like Kingston Technology and Micro Center. Technical Specifications

Drives identified as "13FE USB DISK 50X" generally fall under the USB 2.10 or 3.0 protocols. Detailed hardware snapshots usually reveal the following: Vendor ID (VID): 13FE Product ID (PID): Often 5100, 5200, or 5500

Controller: Typically Phison PS2251-07 (PS2307) or PS2251-19 (PS2319)

Read/Write Performance: Standard speeds for these drives average around 21.90 MB/Sec for reading and 9.32 MB/Sec for writing, though these fluctuate based on the specific flash memory used. Common Issues: The "No Media" Error

Users often encounter this device name when a flash drive begins to fail, specifically displaying a Status: No Media error. This state occurs when the computer recognizes the USB controller (the 13FE chip) but cannot communicate with the NAND flash memory chips where data is actually stored. How to Fix and Restore Your Device

If your drive is showing "No Media" or is write-protected, you can attempt to "revive" it using these methods: 1. Hardware and Driver Basics Flash Drive No Media Error - Hardware & Infrastructure

Go to Top